Knit fabric supplier
French Terry Fabric for Hoodies and Sweatshirts
French terry fabric is a knitted sweatshirt fabric with a smooth face and visible loop-back reverse, commonly specified for hoodies, sweatshirts, joggers, shorts and loungewear.
Sourcing overview
Define the finished result before selecting an article
French terry fabric is identified by its loop-back reverse rather than by one fixed composition, weight or performance result. For comparison, brushed fleece commonly has a raised reverse, with one- or two-sided brushing depending on the article; buyers should confirm the actual construction and finish on the offered sample instead of treating the names as interchangeable.
Use this page to prepare a French terry brief for hoodies, sweatshirts, joggers, shorts or loungewear. Composition, yarn system, GSM, usable width, stretch, reverse finish, colour and test requirements should all be specified for the intended garment and confirmed against the current sample and quotation.
Specification checks
What to confirm on the offered finished sample
Composition and yarn system
State the intended fibre composition and any face, ground or loop-yarn direction. Treat these as buyer requirements to be checked against the offered article rather than as fixed category availability.
GSM and seasonal weight
Give a target GSM or acceptable range together with the garment season and silhouette. Confirm the finished sample because weight alone does not establish warmth, drape or bulk.
Usable width and relaxation
Specify the usable-width requirement and agree when it will be measured after finishing and fabric relaxation. Confirm the quoted width against the approved article and garment marker.
Stretch and recovery
State whether the garment needs mechanical or elastane-supported stretch, the direction of stretch and the intended recovery check. Approve the result on the finished sample using an agreed method.
Loop-back structure and finish
Describe the required face and visible loop-back reverse, including loop scale, hand feel and any surface finish. Use clear face-and-reverse references so brushed fleece is considered only as a separate comparison.
Shrinkage, pilling and colourfastness
List the required test methods, tolerances and care conditions for shrinkage, pilling and colourfastness. Results remain article-, colour- and finish-specific and require current sample or production confirmation.
Development guidance
Prepare a sample and RFQ brief
Start from one of three development paths: identify a catalogue article, send a reference sample, or submit a specification-led brief. O'range Textile can coordinate the buyer brief, closest sample and specification review; the selected composition, GSM, usable width, finish, colour, quantity, MOQ and lead time are confirmed only in the current quotation.
Include the garment type, season, target composition, GSM, usable width, stretch direction, face and loop-back reference, colour plan, destination and testing needs. Note whether the garment will be washed, printed, embroidered or paired with rib trims so the sourcing team can review the appropriate custom-development route.
Continue the buyer research
Compare French terry and fleece
Choose between a loop-back reverse and a brushed or raised finish using garment, season and test requirements.
Specify French terry for hoodies
Turn the hoodie silhouette, season, GSM, reverse surface and trim plan into a sample-ready sourcing brief.
Source heavyweight French terry
Review weight, usable width, shrinkage, seam bulk and wash approval for substantial sweatshirt programs.
Coordinate French terry with rib trims
Review rib-knit directions for cuffs, neckbands and waistbands that must be sampled with the body fabric.
Compare a lighter stretch-knit route
Use cotton spandex jersey when the garment brief prioritizes a lighter hand, fitted silhouette and stretch recovery.
Send a French terry development brief
Share a catalogue article, reference sample or specification-led brief for sample and quotation review.
Best-fit apparel uses
- - Hoodies
- - Sweatshirts
- - Joggers
- - Loungewear
Buyer questions
What garments use French terry fabric?
French terry fabric is often used for hoodies, sweatshirts, joggers, shorts and comfort-focused apparel. Buyers should select composition, GSM, usable width, loop-back finish and test requirements for the actual garment rather than approve by category name alone.
Can O'range Textile support private-label hoodie fabrics?
Yes. Buyers can submit a hoodie specification, reference sample or catalogue direction for a French terry sample review. Exact availability, MOQ, lead time and price are confirmed in the current quotation.
How is French terry different from brushed fleece?
French terry normally retains visible loops on the reverse; by comparison, brushed fleece commonly has a raised reverse, with one- or two-sided brushing depending on the article. Weight, hand, warmth and durability still depend on the exact article, so buyers should compare labeled finished samples.
What GSM and usable width should a hoodie buyer specify?
Specify a target GSM or acceptable range based on the hoodie season and silhouette, plus the minimum usable width required by the marker. There is no universal hoodie value; confirm both measurements on the relaxed finished sample and current quotation.
Which shrinkage and pilling checks matter for French terry?
The brief should state the intended care cycle, length-and-width shrinkage method, pilling method and acceptance criteria. Where reverse appearance or shedding matters, add those checks and approve the actual article, colour and finish.
Can buyers customize composition, colour and reverse finish?
Buyers can submit target composition, colour and loop-back finish requirements through the custom-development route. Feasibility, sample path, MOQ, lead time, testing and price are confirmed for the specific inquiry rather than promised by the category page.
Production and quality context
Review the finished sample against the brief
O'range Textile can review a French terry buyer brief, coordinate the closest finished sample and specification discussion with the sourcing team, and prepare the catalogue-article, reference-sample or specification-led inquiry path for private confirmation.
Shaoxing Jingtian Textile Technology Co., Ltd. documents 200+ circular knitting machines as manufacturing context for review and coordination; it is not category-specific capacity.
- 01
Match the labeled finished sample to the agreed French terry composition, construction and finish.
- 02
Review GSM, usable width, loop-back appearance, sewing behavior and requested test results for the intended garment.
- 03
Record dated approval, then confirm the current quotation for the requested program.
The supplied 104-record finished-fabric catalogue does not verify a current exact French terry article or production specification. Availability, composition, GSM, usable width, finish, test result, MOQ and lead time remain inquiry-specific.
Review a French terry brief before quoting
Send the target composition, GSM, usable width, face, loop-back reverse, garment use and reference material for a sample and current quotation review.
Catalogue evidence boundary
The supplied 104-record finished-fabric catalogue does not assign a specific article to this broad construction route. Share a reference sample or specification so the sourcing team can confirm the relevant sample and quotation path without implying unsupported live stock.