Knit fabric supplier
Cotton Jersey Fabric for T-Shirts and Basics
Cotton jersey fabric is a single-knit construction with vertical V-shaped stitch legs on the smooth technical face and horizontal stitch crowns on the more textured technical back, commonly specified for T-shirts, base layers, loungewear and private-label basics.
Sourcing overview
Define the finished result before selecting an article
Cotton jersey fabric is a single-knit construction often considered for soft, flexible apparel. The category name alone does not define the finished result: fibre composition, yarn count and yarn system, stitch density, GSM, usable width, dyeing and finishing can all change how the fabric looks, cuts, sews and behaves in a garment.
Use this page to prepare a cotton jersey fabric brief for T-shirts, base layers, loungewear or private-label basics rather than to assume a stock specification. Share the garment, colour, finish, care route and testing requirements so the offered article can be reviewed against its intended application.
Specification checks
What to confirm on the offered finished sample
Composition and yarn direction
Within this sourcing field, provide the requested yarn specification rather than a fibre orientation: specify the fibre composition, yarn count or linear density, carded or combed preparation, the relevant spinning system, and twist or torque where spirality matters; confirm each field on the offered article.
GSM and opacity
State the target GSM or acceptable range together with garment colour, season, layering and opacity expectations, then confirm weight and coverage on the finished sample because dyeing and finishing can change its appearance.
Usable width
Provide the required usable width and garment-marker context, agree when width will be measured after dyeing, finishing and relaxation, and confirm it against the current finished sample and quotation.
Stretch and recovery
Specify whether a non-elastane jersey brief is assessing construction-led stretch and residual growth or whether elastane-supported stretch and recovery are required, then define the direction and agreed test method and confirm the result on the finished sample.
Dyeing and surface finish
State the colour reference, target hand and requested surface finish together with any garment-wash context, then confirm the approved shade and finish on the current sample using agreed review methods.
Shrinkage, spirality, pilling and colourfastness
Specify the intended care route, test methods and tolerances for shrinkage, spirality, pilling and colourfastness, then confirm and approve the results for the exact finished article before a bulk decision.
Development guidance
Prepare a sample and RFQ brief
Choose one of three development paths: start from a catalogue article, send a reference sample, or submit a specification-led brief covering the garment, composition, GSM, usable width, opacity, finish, colour and testing requirements.
For each path, O'range Textile can review the brief and coordinate the closest finished-fabric direction. The exact article, current sample route, availability and commercial terms must be confirmed in the current quotation rather than assumed from this category page.
Continue the buyer research
Compare interlock and jersey for a sourcing brief
Use a side-by-side buyer decision covering construction, edge stability, drape, opacity and sample checks.
Compare jersey with interlock
Review the construction, stability and buyer checks that distinguish single jersey from interlock.
Understand rib-knit stretch
Compare body jersey with rib constructions used for trims and stretch-focused garments.
Compare cotton jersey with cotton spandex jersey
Review when a closer-fitting garment brief needs elastane-supported stretch and recovery rather than a conventional cotton jersey direction.
Compare cotton jersey with interlock fabric
Use the interlock route when the garment brief calls for a double-knit construction, balanced faces or greater edge stability.
Send a cotton jersey development brief
Share a catalogue article, reference sample or specification-led brief for a current sample and quotation review.
Review documented finished-fabric records
Start from documented article data, then ask sales to confirm the closest sourcing route.
Best-fit apparel uses
- - T-shirts
- - Base layers
- - Loungewear
- - Private-label basics
Buyer questions
What is cotton jersey fabric used for?
Cotton jersey fabric is commonly considered for T-shirts, base layers, loungewear and private-label basics because the single-knit construction can provide a soft, flexible fabric direction. Buyers should still match the exact article, opacity, drape, seam behaviour and care route to the garment before approval.
Can overseas buyers request cotton jersey samples?
Yes. An overseas buyer can start from a catalogue article, send a reference sample or submit a specification-led brief. O'range Textile can then review the garment use and requested checks, while current sample availability and the quotation are confirmed for the inquiry.
How should buyers specify GSM and opacity for a cotton jersey T-shirt?
There is no universal GSM for every cotton jersey T-shirt. State the season, colour, silhouette, layering and opacity requirement, then confirm GSM and coverage on the current finished sample under an agreed viewing or test method before approval.
What is the difference between 100% cotton and cotton-rich jersey?
100% cotton identifies an all-cotton fibre composition, while cotton-rich jersey includes another disclosed fibre that may change stretch, recovery, hand or care behaviour. Composition does not by itself establish performance, so buyers should confirm construction, finish and test requirements on the exact article.
How should shrinkage and spirality be checked?
Buyers should state the conditioning, wash, drying and measurement method, plus acceptable shrinkage and spirality limits for the garment. Test the offered finished sample using the agreed method and approve the actual article rather than relying on a category-level result.
Can buyers request custom colour, finish and usable width?
A buyer can include custom colour, surface finish and usable-width targets in the brief. O'range Textile can review them against a catalogue article or reference sample, but the achievable combination, sample route and commercial terms are confirmed for the specific inquiry and not assumed from the category page.
Production and quality context
Review the finished sample against the brief
O'range Textile can review a cotton jersey buyer brief, reference sample or requested specification, coordinate the closest finished-sample discussion with the sourcing team, and prepare the current sample and quotation path for private confirmation.
Shaoxing Jingtian Textile Technology Co., Ltd. documents 200+ circular knitting machines as manufacturing context for review and coordination; it is not category-specific capacity.
- 01
Match the labeled finished sample to the agreed cotton jersey specification.
- 02
Run a sewing trial and review spirality after the agreed wash/dry method, alongside GSM, usable width and opacity, for the intended garment.
- 03
Record dated approval, then confirm the current quotation for the requested program.
The supplied 104-record finished-fabric catalogue does not verify a current exact cotton jersey article or its specification. Current availability, MOQ and lead time are inquiry-specific and must be confirmed with the offered sample and quotation.
Review a cotton jersey brief with the sourcing team
Start from a catalogue article, reference sample or specification-led brief, then confirm the current sample and quotation for the intended garment.
Catalogue evidence boundary
The supplied 104-record finished-fabric catalogue does not assign a specific article to this broad construction route. Share a reference sample or specification so the sourcing team can confirm the relevant sample and quotation path without implying unsupported live stock.